Key Features
DS-3E2510P supports the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP, backup of active and standby uplinks, and LACP link aggregation to cater to the requirements of high reliability of carriers;
DS-3E2510P has powerful ACL functions to access and control L2-L7 data, providing carriers flexible and various policy control methods;
DS-3E2510P supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade;
DS-3E2510P supports various L2 multicast functions such as IGMP-snooping, user fast-leave mechanism and trans-vlan multicast copy;
DS-3E2510P supports IEEE 802.3AF/AT standard, built-in large power supply, no need of external power supply, that is, 24-port AF full-load power supply.
DS-3E2510P supports the configuration of Base-T port priority when the power is inadequate.
DS-3E2510P supports POE port and up to 4KV power thunder-proof.
DS-3E2510P supports priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority to better streamline carrier’s services;
DS-3E2510P provides flexible bandwidth control policies, supporting port-/flow-based flow limit, and ensuring the line speed forwarding of each port to make sure the high quality of network services;
DS-3E2510P supports multiple queue schedule algorithms such as SP, WRR, or “SP plus WRR”;
Equipment-level security: The advanced hardware infrastructure design realizes the level-based packet schedule and packet protection, prevents DoS-/TCP-related SYN Flood, UDP Flood, Broadcast Storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions;
Perfect security authentication mechanisms: IEEE 802.1x, Radius and BDTacacs+;
DS-3E2510P supports storm/multicast/unicast limit which ensures the normal running of equipment in harsh network conditions;
DS-3E2510P supports perfect ring detection mechanism which ensures the long-term stable running of network;
DS-3E2510P supports port isolation within the same VLAN, DHCP-Snooping, and IP plus MAC plus Port binding for ensuring user data security;
DS-3E2510P supports many management modes such as the console port, Telnet, SSH;
DS-3E2510P supports the WEB management mode, which is easy and efficient so that it makes installation and debugging convenient;
Port number : 8 x 10/100/1000Base-T PoE ports, 2 1000Base-X SFP ports, 1 Console port
Switching capacity : 20Gbps
Packet forwarding rate : 15Mpps
MAC address table : 8K
Dimensions(L × H × D) : 280 mm × 45 mm × 179 mm
Consumption : <15W
POE standard : IEEE802.3af, IEEE802.3at
POE power budget 1 : 125W
Power supply : AC:100V-240V,50Hz±10%
Environment : Operating temperature/humidity: 0℃-45℃,5%-95% non-condensing Storage temperature/humidity: -20℃-70℃;5%-95% non-condensing
MAC exchange : Static configuration and dynamic MAC learning; MAC browsing and removal Configurable aging time of the MAC address; Limited number of learnable MAC addresses; MAC filtration
VLAN : 4K VLAN; GVRP; QinQ; Private VLAN
STP : 802.1D (STP), 802.1W (RSTP) and 802.1S (MSTP) BPDU protection, root protection, and loopback protection
Multicast : IGMP v1/v2/v3 IGMP snooping IGMP Fast Leave Multicast group strategy and quantity limitation
QoS : Flow classification based on L2~4 protocols CAR flow limit 802.1P/DSCP priority re-labeling SP, WRR, and “SP+WRR” Congestion avoidance mechanisms like Tail-Drop and WRED Flow monitoring and flow shaping
Security : L2/L3/L4 ACL flow identification and filtration DDoS attack prevention, TCP’s SYN Flood attack prevention, UDP Flood attack prevention, etc Broadcast/multicast/unknown unicast storm-control Port isolation Port security, and “IP+MAC+port” binding
Reliability : Static/LACP link aggregation EAPS and ERPS
Management : Console, Telnet, SSH2.0, Web SNMP v1/v2/v3 TFTP RMON